BILLETRON™ 38 - Long Body (125cc-300cc)
(90mm Overall Length)
Performance - Consistency - Simplicity
The BILLETRON 38 gives riders a jump up in performance capability while continuing in the simplicty and techology of Lectron heritage. Gain performance, lose the jets. The BILLETRON 38 builds on the existing two fuel circuit system of the legacy Lectron products. Continuing with Lectron XCELERATOR Metering Rod Technology and the Adjustable Power Jet fuel circuit for top end fuel adjustment, the BILLETRON™ 38 mechanically adjusts to your elevation changes and weather conditions while giving flexibiliy to adjust top end fuel, delivering optimal peak performance. The BILLETRON™ 38 differentiates itself in the re-designed air flow and fuel dynamics that are specifically engineered to maximize air flow and velocity in 125cc-300cc two strokes. This results in a significant increase in torque and performance with improved bottom end throttle response. If you're looking for performance and simplicity, the BILLETRON™ 38 is for you.
Key Features:
- Re-designed bore for air flow and velocity optimzation in 125cc-300cc two strokes
- Two fuel circuits: Metering rod - Power jet
- OEM Ready - Use your OEM throttle cable and throttle
- Fuel Drain Plug
- DIY rebuild capability - change gaskets, o-rings, and other parts in your garage
- 30 Day Guarantee
XCELERATOR METERING ROD (LEARN MORE)
Still dont know which is right for you? Let us help you. Call 830-331-2235
PLEASE SEE 'VEHICLES' tab FOR LONG BODY FITMENT
Performance
- Significant bottom end hit - Torque and HP increase
- Increased acceleration - Peak torque availability at lower RPM ranges for unmatched power availability
- Faster power jet activation - Meaningful increase in CFM, signals activation earlier increasing top end performance and fine tunability
- Improved Idle - Centralized and focused air flow to the fuel signal creating improved idle consistency
- Increased fuel economy of 30%
- Now with the Addition of our Patent Pending XCELERATOR metering rod that gives a significant boost in low RPM torque (up to 20%) and rideability over our previous metering rod.
- ISO Certified precision machining paired with billet aluminum construction for unbeatable product consistency and performance
Simplicity
- Set it and forget it! - Dial in your bike and allow the technology to mechanically compensate for air property changes. Drop the complexity of jetting your carburetor.
- Adjustable power jet – easy, on the track tuning, for mid to wide open fuel delivery. Adapt to the technicality, and rider preference, of each track without sacrificing performance across all throttle positions
- Improved Idle - Centralized and focused air flow to the fuel signal creating improved idle consistency
Support
- 30 Day BILLETRON Guarantee
- 1-Year Product Warranty
- Available Techincal Support for product selection, installation, tuning, and bike diagnostic
IN EVERY PACKAGE
- 38mm Long Body (90mm OL) BILLETRON carburetor
- Long body comes with a bell adapter, o ring, and set screws that is factory installed
- Quick tuning guide flyer
- BILLETRON tuning and installation QR code stickers
*Bell adapter can be taken on and off to switch between 78mm overall length and 90mm overall length
**BILLETRON 38 utilizes the OEM throttle cable
***If you have a 'slip in' throttle cable, you will need to order the cable adapter - 'Slip In' Cable Adapter
+ EZ TUNING KIT
- (2) Easy turn top cap thumb screws
- (1) Metering rod adjustment tool
+ COLOR ANODIZING
- (1) Anodized carburetor body
- (1) Anodized top cap
- (1) Anodized bowl bracket
The BILLETRON 38 - Long Body is applicable to older model 125cc-300cc single cylinder two-stroke motors. The BILLETRON 38 is a performance upgrade that replaces the vast majority of OEM carburetors in 125cc-300cc dirt bikes. Older dirt bike models may require the long body version (90mm overall length) BILLETRON - LONG BODY. Please see dimensions for confirmation of fitment.
May be appicable to these vehicles;
- 1985-2002 Honda CR 250
- 1997-1999 Kawasaki KX250
* - Many OEM intake manifolds for older model dirt bikes are no longer produced. It is important to know the dimensions of your intake manifold ID, air box ID, and overall length from intake manifold to air box. Many older bikes have mix and matched intake manifold and air boxes which could affect fitment of the carburetor. Our carburetors spigot and bell diamater is replicable to a PWK 38. The BILLETRON short body is 78mm OL and the long body is 90mm OL.
** = Select models with 'slip in' throttle cable require adapter 'Slip In' Cable Adapter
If you have a question on using this product for custom applications, please contact contact us at [email protected] or 830-331-2235.
SPIGOT OD (ENGINE INTAKE)
46MM
BELL OD (AIR INTAKE)
62MM
OVERALL LENGTH
90MM
I have a TPS bike, can I use the BILLETRON?
ANSWER: Absolutely. The Billetron can be used with 3D TPS bikes.
HOW?: The TPS cables can be disconnected, secured, and plugged. Your bikes timing will resort back to a traditional 2d mapping (RPM).
For more details or questions, please contact our technical support team at [email protected] or 830-331-2235